Konica Minolta Copier 2223 - Manual (Page 67)

7-2 Special Copying
Special Copying
Shift/Reduce & Shift
Using the Platen Glass
Use Shift to create a 10 mm binding margin. Use Reduce & Shift to
reduce the overall image when a binding margin is likely to cause
image loss.
ORIGINAL SIZE AND COPY SIZE SHOULD BE THE SAME
ORIGINAL PLACEMENT: Face down, page heading at top
MAGNIFICATION: 1:1 only
COPY REDUCTION: 11'x17"/8.5"x14" to 97% of Original; 8.5"x11"R to 96% of
Original; 8.5"x11"/5.5"x8.5" to 95% of Original
INCOMPATIBLE: Change Magnification, AMS, Book Copy (incompatible with
Reduce & Shift only)
1 Place originals FACE DOWN
on platen glass with page
heading at top.
2 Press COPY MODE to select
desired copy mode.
3 Press SHIFT/REDUCE & SHIFT
to select Shift or Reduce &
Shift.
4 Press START PRINT .
5 To clear Image Shift mode,
press AUTO .
Shift Result:
1
s 1: Image shifts right every page
1 s 2: Image shifts left even pages
NOTES:
1 When using bypass with Reduce & Shift, a 3% reduction is automatically selected.
2 To remove an existing binding margin, place page heading at bottom.