Konica Minolta Copier 2223 - Manual (Page 70)

Special Copying 7-5
Special Copying
Frame and Fold Erasure (continued)
Setting Frame Erasure
Set Frame Erasure when using Frame Erasure to eliminate the black
copy marks along borders. Refer to page 7-4 for instructions on using
Frame and/or Fold Erasure.
FRAME MEASUREMENT: 05mm/10mm/15mm
1 Press ERASURE to select
Frame Erasure. The current
Frame measurement will be
displayed in the message area.
2 Press [P] . The Frame light will
flash.
3 Use keypad to enter a Frame
measurement (05mm, 10mm,
15mm).
Press: [0][5] for 5mm
[1][0] for 10mm
[1][5] for 15mm
The Frame measurement is
displayed in the message area.
4 Press [P] twice to store the
Frame measurement. The
Frame erasure light will go out,
and the initial print quantity will
be displayed.
Frame Erasure eliminates black
copy marks along borders.
NOTE: The frame setting will remain valid until it is changed.