Konica Minolta Copier 2223 - Manual (Page 71)

7-6 Special Copying
Special Copying
Frame and Fold Erasure (continued)
Setting Fold Erasure
Set Fold Erasure when using Frame Erasure to eliminate the black
copy marks along center strip. Refer to page 7-4 for instructions on
using Frame and/or Fold Erasure.
FOLD MEASUREMENT: 10mm/20mm/30mm
1 Press ERASURE to select Fold
Erasure. The current Fold
measurement will be displayed
in the message area.
2 Press [P] . The Fold light will
flash.
3 Use keypad to enter a Frame
measurement (10mm, 20mm,
30mm).
Press: [1][0] for 10mm
[2][0] for 20mm
[3][0] for 30mm
The Fold measurement is
displayed in the message area.
4 Press [P] to store the Fold
measurement. The Frame
erasure light will go out, and the
initial print quantity will be
displayed.
Fold Erasure eliminates black
copy marks along borders.
NOTE: The fold setting will remain valid until it is changed.