Maintenance and supplies – Konica Minolta Copier 2223 User Manual

Page 82

Advertising
background image

8-8 Maintenance and Supplies

Maintenance and Supplies

Adding Toner

When toner supply is low, the message ADD TONER will be displayed
in the message area. No further copying will be possible and P25 will
flash in the magnification ratio window.

CAUTION

Before adding toner, carefully read the directions and safety
information included with the toner cartridge. Keep toner away
from children. Although toner is non-toxic, do not inhale it or allow
it to enter your eyes. In case toner comes in contact with eyes,
consult your physician. If you have additional concerns, read the
Material Safety Data Sheet (MSDS).

1 To loosen toner, gently strike

the bottom of cartridge against
a solid surface. Turn cartridge
over and repeat procedure.

2 Shake cartridge vigorously.
3 Remove only the bottom plastic

cap.

4 While pressing release buttons

on left and right sides of copier
front door, open the front door.

5 Raise green toner box lid.

6 Insert cartridge over unit with

>PP< mark facing you,
inserting first the right, then the
left side of the cartridge, until
completely upright.

Advertising