2 printer properties, Accessing printer properties, Installing optional devices – Kyocera FS-820 User Manual

Page 13: Auto configure, Chapter 2, Printer properties, 2printer properties

Advertising
background image

Printer Properties

User Guide

2-1

2

Printer Properties

This chapter explains how to customize the following printer driver settings:

Accessing Printer Properties

Installing Optional Devices

User Settings

Page Description Language (PDL)

Administrator Settings

Compatibility Settings

Follow the steps below to set your preferred options as the default settings. These
default settings can be changed temporarily when printing from Windows-based
applications.

Accessing Printer Properties

1

Click Start in the Quick Launch toolbar and click Printers and Faxes. The Printers
and Faxes
window appears.

1

2

Right-click the printer icon in the Printers and Faxes window.

2

3

Click Properties in the list. The Properties dialog box appears.

3

Installing Optional Devices

In the Printer Properties dialog box, go to the Device Settings tab. For each
optional device installed in your printing system, select the equivalent setting under
the Device Options list. Available devices include finishers, paper feeders, large
capacity feeder, hard disk, mailbox, and folding unit.

For models connected to a network, the Auto Configure button can be used to
detect all available devices. See

Auto Configure

for more information. You can also

specify the memory setting, PDL (Page Description Language), settings for the user,
and more.

Auto Configure

Auto Configure detects the installed device options on the printing system if it is
connected over a network. This button appears in the Device Settings tab.

Auto Configure can detect printing system devices such as input devices, output
devices, and hard disk size. Then it updates the Device options list in the Device
Settings
tab. Auto Configure keeps the printer driver’s Device Settings consistent
with the actual printing system devices.

Note: Not all installed devices are detected by using Auto Configure. Before
selecting OK in the Device Settings tab, check the settings to make sure they are
correct.

Advertising
This manual is related to the following products: