Kyocera FS-820 - Manual (Page 16)

Printer Properties
2-4 KX Driver
Assigning Custom Boxes
If you select the Hard disk check box, the Hard Disk Settings dialog box appears
and virtual mail boxes can be created. For further details, see
Custom Box on
page 8-2 . If the device listing is already selected, double-click the option to open the
Hard Disk Settings dialog box.
Note: An installed hard disk supports the following options: Custom box, Quick
Copy, Proof and Hold, Private Print, and Job Storage.
User Settings
The following user information can be configured by selecting User in the Device
Settings tab.
• Identification
• Unit of Measurement
• Language Preference Selection
Identification
In this dialog box, type user name and department information to be used with the
Job Storage feature. For further details, see
Job Storage (e-MPS) on page 8-1.
1 In the Device Settings tab, click User. 1
2 The User Settings dialog box appears. In the User name and Department text
boxes, type up to 31 characters.
2
• Type the preferred name in User name text box.
• Type the user's department or group name in the Department text box.
3 Click OK.
Unit of Measurement
The unit of measurement is used for the following settings:
• Custom Page Sizes setting in the Page Sizes section in the Basic tab
• Spacing setting in the Watermark Add and Edit dialog boxes
• Poster settings in the Layout tab.
In the User Settings dialog box, select either inches or millimeters.