Kyocera FS-820 - Manual (Page 25)

Printer Properties
User Guide 2-13
driver or one from another manufacturer. If media source macros exist for the older
driver, then the alignment of media source values maintain support without the need
to change the macros.
Use the Driver Info utility, available on the Product Library CD, to compare the source
values for all installed drivers.
If the values for a given media source differ between the old and new printer drivers,
reassign the value in the new driver to match the value in the previous driver.
Compatibility settings can be adjusted by selecting Compatibility in the Device
Settings tab.
1 In the Device Settings tab, click Compatibility. 1
2 The Compatibility Settings dialog box appears. From the Media source
enumeration list, select the paper supply method. The current value is listed in the
Enumerated value box.
3 Type a new Enumerated value for the media source and click OK. You can also
restore all the parameters to the default by clicking Reset.
2
The other options in the Compatibility Settings dialog box include: 3
• Disable face-up reverse page order
This option prevents reverse order printing if face-up output is selected.
• Ignore application collation
Use this option to bypass the Collate setting in the application, and give priority
to the printer driver setting.
• Combine source and media type lists
This option changes the Basic tab of Printer Properties so that Media type and
Source are combined into one box, labelled Source.
4