Using finishing edge – Kyocera FS-820 User Manual

Page 43

Advertising
background image

Finishing

User Guide

5-2

You can choose the position of staples and hole punches in a document composed
of mixed page sizes. In contrast, if you are printing a mixed page size document
without using Finishing edge, staple or hole punch positions depend on the paper
size settings (portrait or landscape) in the paper cassettes.

Finishing edge should be selected before any other features in the Finishing tab. If
set last, Finishing edge might change any settings you previously made under Staple
or Punch.

In the Finishing tab, if Booklet (fold) is selected for the Staple feature, Finishing tab
options are unavailable. Finishing edge makes some other features unavailable,
such as Separation and Rotated. Finishing edge cannot be used with the Poster
feature.

To create a gutter in the document, click Gutter. A gutter increases the blank space
on the left side or top of the printed page by scaling down text and graphics. For more
information see

Gutter

on page 5-4. For applications that do not depend on the driver

for page size (such as Microsoft Word), use the application’s Page Setup dialog box
to specify the sizes of the mixed pages in your document.

Page Size Combinations

Finishing edge can be used for the following combinations of page sizes:

A4 and A3 (210 x 297 mm and 297 x 420 mm)

B5 (JIS) and B4 (182 x 257 mm and 257 x 364 mm)

Letter and Legal (8.5 x 11 in. and 8.5 x 14 in.)

Letter and Ledger (8.5 x 11 in. and 11 x 17 in.)

16K and 8K (197 x 273 mm and 273 x 394 mm)

Using Finishing Edge

1

In the Basic tab, from the Print size list, select the size of the first page to be printed
in the mixed page document.

1

Advertising
This manual is related to the following products: