Kyocera FS-820 - Manual (Page 46)

Finishing
5-5 KX Driver
Note: Staple and Separation features cannot be used together.
If Printer default is selected as the Destination in the Basic tab, the selection of an
option in the Finishing tab results in the automatic selection of a destination
compatible with that finishing option. The destination is automatically updated to the
first available output tray that supports the selected finishing option.
Staple, Punch, and Separation > Offset jobs each select the Destination
automatically. If Staple > Booklet [fold] is selected, Booklet in the Layout tab is
also automatically selected. If the finishing option is changed, the Destination
selection is not affected.
Using the Stapler
1 From the application’s Print dialog box, open Properties. (Select Print from the File
menu, and select Properties.)
1
2 Click the Finishing tab, then select Staple. 2
3 Select the available stapling position: Upper left 3
Note: You can increase the left or top margin to provide additional space for stapling
by using the Gutter feature. See Gutter on page 5-4.
4 Select how many pages to staple together under Count. 4
Note: The maximum number of sheets that can be stapled varies, depending on the
selected Page size or Media type, and on the finisher model. See your finishing
device’s Operation Guide for details.
• All sheets (maximum of [--])
Staples all document sheets up to the displayed limit. If the document being
printed has more than the maximum number of sheets, the document is not
stapled. One sheet can equal two pages when duplexed.
For example, if the supported maximum is 50 document sheets, then a 58 sheet
document is not stapled.
• After every [--] sheets
Select this option to divide the document into sets, with a specified number of
sheets in each set, then staple each set separately. You can designate from 2
sheets up to the limit displayed under All sheets. If the final set has fewer
sheets than the limit, it is stapled.
For example, if stapling has been specified after every 20 sheets for a document
that has 58 sheets, the print job is stapled in sets of 20, 20, and 18 sheets.
5 Click OK to return to the Print dialog box. 5
6 Click OK to start printing. 6
The printed document is stapled and delivered to the output tray.
For further details about stapler specifications, refer to your finishing device’s
Operation Guide.