Kyocera FS-820 - Manual (Page 57)

Publishing
User Guide 7-1
7 Publishing
This section describes the Cover mode, Page insert, and Transparency interleaving
features of the printer driver. When these options are used with the MP tray, cassette
mode (the default setting), must be set. For further details, refer to the printing
system's Operation Guide.
• Cover mode: Adds a front or back cover to your document.
• Page insert: Inserts blank or printed pages before pages in your document.
• Transparency interleaving: Inserts a blank or printed page between
transparencies.
Printing with Covers
For your document's front cover or front and back covers, you can insert and print on
paper that is a different weight or color than the paper for the body of the document.
You can also specify cover printing when completing booklet printing settings. The
paper used for printing the document body is specified in the Paper settings in the
Basic tab of the Properties dialog box. The source of the cover paper is specified
by adjusting the Media for cover settings in the Publishing dialog box. You can also
print on the covers.
To print using the Front inside or Back outside options in the Basic tab, you must
select Print on both sides.
Although Cover mode and Page insert may be used simultaneously, they cannot
be used with Transparency interleaving (described in
Transparency Interleaving on
page 7-6).
For further details on printing with covers in the booklet printing settings, refer to
Booklet Printing on page 4-2.
1 From the application’s Print dialog box, open the Properties. (Select Print from the
File menu and select Properties.)
1