Save jobs in custom boxes – Kyocera FS-820 User Manual

Page 69

Advertising
background image

Job

User Guide

8-6

Save Jobs in Custom Boxes

1

From the application’s Print dialog box, open the Properties dialog box, and click
the Job tab.

1

2

Select Custom box and click Selection.

2

3

The Custom Box Settings dialog box appears.

3

If no Custom boxes have been created in the driver, the last two options are disabled.
See

Set Up Custom Boxes in the Driver

on page 8-3 for instructions on adding a

Custom box.

The options, and their behavior at print time are explained here:

4

Use the specific box number This option lets you type in the box number and
password here instead of selecting from a list after you click Print (or OK, depending
on the application you are printing from). To use this option, select Use the specific
box number,
type the box number and password, and then click OK.

Prompt for box number If this option is selected, at print time the driver asks for
the box number and password.

Display box number list If you select this option, at print time the driver opens a
dialog box with a list of Custom boxes to choose from. Select a box, type the
password, and then click OK.

Verify box number for each login user At print time this option asks for a box
number and password for each login user saved to a custom box. The box number

Advertising
This manual is related to the following products: