Be familiar with resuscitation techniques, Coincidental damage to equipment in cabinets, Lifting/handling hazards – Kyocera VLSG-01 User Manual
Page 15
VanLink System featuring TouchStar™ Technology - Troll Systems Corporation
Safety Considerations
Document VLSG-01 - 10/17/2008
S-3
Be Familiar With Resuscitation Techniques
Personnel working with or near high voltages should be familiar with modern methods
of resuscitation. It is beneficial to ensure that personnel are capable of performing
Cardio-pulmonary resuscitation (CPR) should the need arise.
Coincidental Damage to Equipment in Cabinets
When removing equipment from cabinets/consoles, exercise care so that surrounding
wiring installations and equipment are not physically damaged in the process.
Disconnect and secure any surrounding wiring or hardware which could cause damage
to or be damaged by the equipment being removed.
When installing equipment into cabinets/consoles, exercise care to protect surrounding
wiring installations and equipment from being physically damaged in the process.
Neatly stow excess cable/wiring and replace all tie wraps, clamps, and other retaining
devices which were removed. Neat installations reduce the chances of coincidental
damage to adjacent equipment and promote more efficient air circulation and equipment
cooling.
Lifting/Handling Hazards
The removal and installation of large, heavy, or awkward component assemblies,
especially equipment attached to the external areas of the aircraft, will require a
minimum of two (2) personnel to safely handle. Alternatively, the use of appropriately
rated material handling equipment can be used when determined to be safe. Where
limited access prevents the use of material handling equipment, ensure that an adequate
number of personnel are present to safely handle the anticipated loads.
CAUTION:
Pushing or forcing equipment into/out of equipment
cabinets and enclosures can easily damage surrounding
equipment, cables/wiring, or fiber optic cable installations.
Be alert to avoid coincidental damage to equipment when
accessing crowded installations. Coincidental damage is
often difficult to detect and even more difficult to
troubleshoot.