Kyocera VLSG-01 - Manual (Page 16)

User Manual
VanLink System featuring TouchStar™ Technology - Troll Systems Corporation
S-4 Document VLSG-01 - 10/17/2008
Electrostatic Discharge Sensitive (ESDS) Components
Computers, microprocessors, and other solid state components (circuit cards,
I/O boards, etc.) which are not clearly marked with the ESDS symbol will be handled as
ESD sensitive components until determined otherwise. Retain protective ESDS packing
and shipping bags, containers, non-conductive foam pads, etc. (see
Figure S–1 ) for use
in the return of repairable components.
CAUTION: Beware of electrostatic buildup. Delicate solid-state
Integrated Circuits (ICs) can be damaged by improper
handling procedures. Use proper electrostatic safeguards
when installing/removing circuit cards and handling ESD
sensitive assemblies. As required, wear a grounded wrist
strap, use antistatic floor and table mats, and minimize the
handling of sensitive solid-state devices. Keep all ESD
sensitive components in their original containers until
ready for use. Always discharge personal static before
handling ESD sensitive components and do not slide solid
state devices over any surface. Handle plug-in card
assemblies only by their non-conductive edges.