Kyocera VLSG-01 User Manual

Page 17

Advertising
background image

Minimize Handling.

Keep parts in original containers
until ready for use.

Discharge personal static
before handling devices.

Handle devices by the body.

Use anti-static containers for
handling and transport.

Do not slide devices over any
surface.

Avoid plastic, vinyl and
styrofoam in work area.

When removing plug-in
assemblies, handle only by
non-conductive edges and
never touch open edge
connector except at static-free
work station. Placing shorting
strips on edge connector
usually provides complete
protection to installed devices.

Handle devices only at a static-
free work station.

Only anti-static type solder
suckers should be used.

Only grounded tip soldering
irons should be used.

VanLink System featuring TouchStar™ Technology - Troll Systems Corporation

Safety Considerations

Document VLSG-01 - 10/17/2008

S-5

Figure S–1. Procedures for Handling Electrostatic Sensitive Components

Advertising