Kyocera Angel SE47 - Manual (Page 113)

User Guide for the Kyocera SE44 phone 91
Setting the phone to receive data or faxes
Your phone may be able to receive certain data or faxes, depending on the
system sending the information. To receive data or faxes, you must connect
the phone to a laptop or PC and switch the phone from voice mode to data/
fax mode.
To purchase a cable, contact Alltel; call (800) 349-4188 (U.S.A. only) or
(858) 882-1410; or shop online at www.kyocera-wireless.com/store.
Note: You cannot receive voice calls while the phone is in data/fax mode.
1. Connect the phone to the laptop or PC.
2. Set the Com Speed. (See “Connecting to a laptop or a PC” on page 89.)
3. Select Menu
→
Settings
→
Network
→
Data/Fax Calls.
4. Press to select an option:
– Voice Only—Allow only voice calls.
– Fax, next call or Data, next call—Set the phone to fax mode or data
mode for the next incoming call or the next 10 minutes.
– Fax, until off or Data, until off—Force the phone into fax mode or data
mode until the phone is turned off.