Installing the battery, Charging the battery – Kyocera Angel SE47 User Manual
Page 23
Advertising
User Guide for the Kyocera SE44 phone
1
1 G
ETTING
S
TARTED
Your Kyocera SE44 (Slider) phone comes with an internal/removable
lithium ion (LiIon) battery. Fully charge the battery before using the phone.
Installing the battery
1. Hold the phone face down.
2. Place the battery on the bottom lip of the phone casing,
aligning the metal contacts with those inside the phone.
3. Push down on the battery until it clicks into place.
Charging the battery
The battery is partially charged when you receive your
phone. You must have at least a partial charge
in the battery to make or
receive calls, regardless of whether the AC adapter is connected to the
phone.
You can safely recharge the battery at any time, even if it has a partial
charge.
Advertising