Kyocera Angel SE47 - Manual (Page 34)

12 Using Touch2Talk
• Open the phone and select a T2T contact by choosing Menu
→
Touch2Talk
→
T2T Contacts. Highlight the contact you want to call and
press to connect.
• Open the phone and select a T2T contact by choosing Menu
→
Recent
Calls. Select a list: Incoming Calls, Outgoing Calls, or Missed Calls. Highlight
the contact you want to call and press
to connect. For more about
Recent Calls, see page 35.
• Open the phone and select a T2T contact by choosing Menu
→
Contacts.
Select View Phone List or Find Name to find the contact you want to call.
Highlight the contact to call and press
to connect. For more about
Contacts, see page 48.
You can also make a group T2T call using the phone’s T2T groups list. See
page 18.
Making a private T2T call
1. Press and hold . The “Ready to Speak” tone (three rapid chirps)
sounds when the audio path is ready and the contact is available.
Note: If the contact is unavailable or offline, the “Bong” tone sounds (a single
low-pitched beep).
2. Continue to press while speaking your message.