Kyocera Sanyo Zio ZioTM M6000 - Manual (Page 10)

10 Phone Battery
Phone Battery
Install the Battery
1. Hold the phone face
down.
2. Using your thumbnail,
press and hold the latch
to release lock.
3. Keep pressing the latch
and press the upper part
of the back cover with
your other thumb then
slide the cover down to
remove.
4. Insert the battery
with the metal
contacts facing those
on the device.
5. To replace the back
cover, align then
press the latch area
and upper part of the
cover with your
thumbs to slide the
cover until it snaps into place.
QU AL CO MM 3 G CD MA
Remove the Battery
1. Make sure the device is turned off.
2. Remove the back cover.
3. Place your fingernail
on the grip then lift
to remove the
battery.
Charge the Battery
1. Connect the USB cable
to the Wall/USB
Charger, and then
connect the mini-USB
2. Plug the Wall/USB Charger into
a wall outlet.
side of the cable to the USB
connector on the left side of the device.
Note: You can also charge your phone by
plugging the USB cable into your PC and the
mini-USB side into the device.