Kyocera Sanyo Zio ZioTM M6000 - Manual (Page 29)

User Guide 29
Call a Number with Pause
Use the Pause function to send DTMF tones
from your phone. Your phone supports two
types of pauses:
• Hard Pause: Add a hard pause to indicate
that the succeeding numbers are DTMF
tones. For every hard pause, a message
appears to confirm whether to send the
tones.
• 2-sec Pause: This is a 2-second interval in
sending DTMF tones. To increase the
interval, add a succession of 2-sec pause.
For example, to have an interval of 4
seconds, add two 2-sec pause.
1. On the Dialer screen, touch the keypad to
enter number to call.
2. To add a hard pause, touch Menu > Hard
Pause. The letter P appears to indicate the
hard pause location. To add a 2-sec pause,
touch Menu > 2-sec Pause. The letter T
appears to indicate the 2-sec pause location.
3. Touch the keypad again to enter number of
the DTMF tone.
Note: Repeat the above procedures to add
more pauses.
4. Press the Send key or touch the Call tab.
Your phone dials the number before the
hard pause then sends the DTMF tones
upon confirmation. For 2-sec pause, your
phone will send the DTMF tones
automatically after 2 seconds.
Call a Number with Prepend
Prepend is used to add prefix numbers in front
of a phone number. For example, if your
contact entry is saved without an area code and
you are out of town, use the prepend function
to add the area code before calling the number.
1. On the Dialer screen, touch the Contacts
or Call log tab.
2. Touch and hold a name or number from the
list.
3. Touch Prepend.
4. Touch the keypad to enter the number you
want to add before the phone number.
5. Press the Send key or touch the Call tab.
The following numbers can also be added to
use their function:
• To call the voicemail of the person you are
calling directly, dial 11 + phone number.
• To hide your phone number from the
person you are calling to, dial *67 + phone
number.