Kyocera QCP 6035 - Manual (Page 19)

Using Keyguard 13
Using Keyguard
Keyguard protects your phone from accidental key presses. When phone
power is on but you are not in a call, Keyguard engages automatically
after two minutes. (You can change this time on the Power Preferences
screen.) Keyguard remains on until you either turn it off or answer a call.
To turn on Keyguard manually
Press the backlight button on the top of the phone.
The phone enters Power Save mode. The phone is on, but the screen is
blank and the keypad is locked. You can also turn on Keyguard from the
flip-closed menus. Select Settings, then Keyguard.
If you receive a call while Keyguard is turned on
Press to answer the call. Keyguard is turned off.
To turn Keyguard off
You can turn Keyguard off using any of these methods.
■ Press the backlight button on the top of the phone.
■ Press , followed by the digits 1, 2, 3.
■ Open and close the flip.
See Chapter 13, “Security,” in the Reference Guide on the CD-ROM.
On
Closed