Kyocera QCP 6035 - Manual (Page 52)

46 Kyocera QCP 6035 Smartphone User’s Guide
To perform your first synchronization
IMPORTANT: If you are a Palm user, see “Transferring information between Palm
devices” in Chapter 4 of the Reference Guide before you synchronize your phone.
1. On your computer, double-click the Kyocera smartphone Desktop
icon (or select Kyocera smartphone Desktop from the Start menu).
2. Click in the Windows system tray. In the menu, make sure Local
is checked. Then click Setup.
3. In the Setup window, click the Local tab. In the Serial Port field, select
the port where you connected the cable. Click OK.
4. Slide the phone into the cradle.
NOTE: Do not remove the phone from the sync cradle during synchronization.
5. Tap the sync button on the cradle. During your first synchronization,
a message asks for your user name.
6. On the computer, enter a user name. Click OK.
Every Palm handheld device must have a unique name. Problems may
occur if you synchronize more than one device with the same name.
See Chapter 4, “Transferring Information,” in the Reference Guide.
May be on or off, but do not turn it on or off during synchronization
May be either open or closed