To use data/fax mode – Kyocera QCP 6035 User Manual
Page 47
Using Data/Fax mode
41
To use Data/Fax mode
1.
Slide the phone into the cradle. If the cradle is attached to the port you
use for data synchronization, turn off HotSync on your computer. If
you are using a data cable and/or a different port than the one you use
for synchronization, it is not necessary to turn off HotSync.
2.
Tap
to view the Applications Launcher.
3.
Tap
to open Data/Fax mode.
You see status information beginning with “Initializing Modem” and
continuing to “Ready to Send Data or Faxes.”
4.
Tap the
beside Incoming Calls and select an option:
5.
From the computer, make the connection you want to initiate.
6.
To end the data or fax call, tap End or tap the Applications Launcher
and select a different application.
See Chapter 11, “Setting Up Network Connections,” in the Reference Guide.
On
Open
■
Voice
■
Fax, until off
■
Fax, next call
■
Data, until off
■
Data, next call