Kyocera QCP 6035 - Manual (Page 56)

50 Kyocera QCP 6035 Smartphone User’s Guide
Replacing the battery
❑ If the battery becomes low, an alert appears on the screen. Before you
replace the battery, synchronize the phone with your computer to
back up the data. This helps prevent accidental data loss.
❑ If the phone does not turn on when you press , recharge the
battery immediately.
❑ Before replacing the battery, turn the phone off. Never remove the
battery while the phone is on. To verify that the phone is off, open and
then close the flip. The words “Phone is OFF” appear on the screen.
❑ Only remove the battery to replace it with another battery. Don’t
leave the battery out of the phone. For example, if your battery
becomes drained while you are traveling and you don’t have a second
battery or a sync cradle to recharge it, it is better to leave the drained
battery in the phone than to remove it.
❑ If the battery drains completely, the phone no longer operates.
However, there is enough residual energy in the battery to store your
clock settings and data for about two days.
❑ A built-in backup battery maintains the clock settings and data for an
additional day after the residual energy in the battery is depleted or if
the battery is removed.
❑ If you leave a drained battery in the phone for more than three days,
you can lose all of the stored data. If this happens, replace the battery
and reset the phone. Then synchronize the phone to your computer to
restore the data.