Kenwood KRF-V8030D - Manual (Page 10)

10
Preparations
FM
75 Ω
GND
AM
Setting up the system
Connecting the antennas
AM antenna terminal connections
1 Push lever. 2 Insert cord.
AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible from
the receiver, TV set, speaker cords and power cord, and adjust the direction
for best reception.
3 Return lever.
AM loop antenna
FM indoor antenna
FM outdoor antenna
Use an antenna
adaptor
(Commercially
available)
The AUX IN jacks are convenient for connection of video components
such as a camcorders and video games.
Connecting to the AUX IN jacks
S VIDEO OUT
S VIDEO cord
VIDEO OUT
AUDIO OUT
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the indoor
antenna when you connect one outdoors.
FM outdoor antenna
Lead the 75
Ω
coaxial cable connected to the FM outdoor antenna into the
room and connect it to the FM 75
Ω
terminal.
FM antenna terminal connections
Insert cord.
S VIDEO V L – AUDIO – R AV AUX
• To select the source connected to the AUX IN jacks, select AV
AUX by using the INPUT SELECTOR knob. ^
• When you connect the audio source such as the MD player, you
do not need to connect the video cable.
• When you connect the unit and the component with the S
VIDEO cord, you can get better picture quality.
Camcorder, other VCR,
video game, digital camera,
or portable MD player
Attatch to the stand.