Krown Manufacturing Model Krown 100 - Manual (Page 12)

GETTING STARTED (CONT.)
BATTERY POWER INFORMATION
Your Krown 100 is designed to operate from AC (house electricity) power. The battery is used for
backup memory. If you unplug the AC adapter from the machine, the Ni-Cad battery will operate for
approximately 1/2 hours when fully charged. The batteries will automatically recharge whenever the
unit is plugged into the AC charger/adapter and the TDD is turned OFF. To help the battery last longer,
let it run down until the Power Light turns green. This means that the battery is running down and
needs recharging. The light will be green for several minutes. Then the Krown 100 will stop working.
When this happens, you must change over to AC power to continue using your machine until you
recharge the battery. To reset the Krown 100 after the battery has drained, press and hold CTRL &
SHIFT & ‘.’ (period). On the display you will see “MEMORY LOST. PLEASE RUN SETUP.”
It is suggested that you use the Krown 100 with battery power in a regular cycle. That is, operate the
unit on battery power until it needs recharging. Then recharge the battery by plugging the TDD into the
AC charger/adapter for 12 to 14 hours. (The unit must be turned OFF in order to recharge.)
TDD ALERT
Each time your Krown 100 is turned on, the TDD Alert feature emits tones automatically without
interfering with any of the TDD functions. This feature is turned off if the electronic voice is activated
instead. These tones are to notify the party you are calling that a TDD call is being received. The
moment another TDD answers, the tones automatically stop. If you do not want the TDD Alert tones to
be sent automatically, press the CTRL & S keys at the same time, or press it again to turn TDD alert
back on.
9
CTRL + S TDD ALERT ON
TDD ALERT OFF CTRL + S