Krown Manufacturing Model Krown 100 - Manual (Page 29)

USING THE OPTIONAL ASCII FEATURES AND FAST TYPE (CONT.)
TO CHANGE MODE SETTINGS
You will remain in the preset ASCII mode.
You are going to change the preset mode.
Yes chooses Half Duplex;
No chooses Full Duplex.
Yes chooses 300 Baud;
No chooses Answer mode.
Yes chooses Originate mode;
No chooses Answer mode.
After the three selections have been made, the selected modes are displayed.
Ex: If the last three question have been answered with N, the display will read 110 BAUD, FULL, ANS.
TO MAKE YOUR ASCII CALL
Placing a call with you Krown 100 ASCII is done the same way as placing a call in Baudot. The only
difference is setting the mode to ASCII.
To make the call acoustically, place the telephone handset in the acoustic cups with the cord to the LEFT.
To make the call in Direct Connect, connect your TDD as described on page 18, and make sure you are
in ORIGINATE mode.
Yes; if you want to change modes.
No; this answer will keep the TDD in the preset modes:
“300 BAUD/HALF/ANS.”
Dial the number from the telephone set if you are using the acoustic cups, or from the keyboard if
Direct Connect is used.
• The phone light will show you if the phone is ringing or busy.
• Carrier is displayed when the call is complete and connection has been made.
• Begin your conversation.
26
CTRL +
BACK
SPACE
USE ASCII? Y/N
or
Y CHANGE MODES? Y/N
N 300 BAUD, HALF, ANS
Y HALF DUPLEX? Y/N
Y
OR N 300 BAUD? Y/N
Y OR N ORIGINATE? Y/N
Y
OR N 110 BAUD, FULL, ANS
CTRL +
BACK
SPACE
USE ASCII? Y/N
Y CHANGE MODES? Y/N
Y OR N