Krown Manufacturing Model Krown 100 - Manual (Page 27)

The Multi-Wide printing feature of your Krown 100 allows you to select three sizes of letters and
numbers that are printed on your TDD. These three sizes are:
Normal: 20 characters/line
Condensed: 24 characters/line. These characters are a little
smaller than the Normal-Size characters. They
maybe be used if you wish to save paper by printing
smaller characters.
Wide: 12 characters/line. These characters are very large
and bold and are useful for people who have
difficulty reading the Normal-Size characters.
To select Condensed Print, press and hold the CTRL key and press C.
is displayed.
To select Wide Print, press and hold the CTRL key and press W.
is displayed.
To select Normal Print, press and hold the CTRL key and press N.
is displayed.
NOTE: When the Krown 100 with the Multi-Wide printing feature prints in ASCII, the print will
always be Condensed Print.
The Krown 100 will remember this print width that you selected. For example, if you select Condensed
Print and then turn your Krown 100 off, your Krown 100 will be in Condensed Print mode when you
turn it on again.
TEST MESSAGE
A test message is built into the Krown 100 to use when testing the printer on the machine.
To test the printer:
The test message is displayed and printed.
To end the test message.
VI
24
MULTI-WIDE PRINTING FEATURE
CTRL + C CONDENSED PRINT
CTRL + W WIDE PRINT
CTRL + N NORMAL PRINT
CTRL + Q THE QUICK BROWN FOX...
CTRL + 9 JUMP OVER THE LAZY_