Kompernass KH 6502 - Manual (Page 7)

- 5 -
8. Connecting to a television via the video
output (Composite Video)
For this connection variant the television must be equipped with Audio/Video
cinch sockets (Composite Video).
To connect the DVD player to a television via composite video you will need
an audio/video RCA (cinch) cable.
• Connect the yellow socket marked VIDEO-OUT to the television's yellow
VIDEO socket via an audio/video cinch cable.
• Insert the white audio/video cinch cable plug into the cinch socket inscribed
AUDIO OUT L on the rear panel of the DVD player.
• Then insert the white plug on the other end of the audio/video cinch cable
into the left channel audio socket on the television.
• Insert the red audio/video cinch cable plug into the cinch socket inscribed
AUDIO OUT R on the rear panel of the DVD player.
• Then insert the red plug on the other end of the audio/video cinch cable
into the right channel audio socket on the television
• For playback select the matching channel on your television Check with
the television's instruction manual on how you can set the AV channel.
9. Connecting audio components to the DVD
player
9.1 Connecting a HiFi system or receiver to the DVD player
Besides sound playback of DVDs, VCDs/S-VCDs and audio and MP3 CDs
via the speaker of the television, to which the DVD player is connected,
sound can also be played back via external audio components such as
a HiFi system or receivers.
Requirements for the connection of a HiFi system
In order to enjoy a full sound experience when playing DVDs with the DVD
player you can connect a HiFi system to the player. Before connecting check
with the HiFi system's instruction manual to verify...
•
if the HiFi system is suitable for connection to a DVD player. If yes…
• if the HiFi system is equipped with cinch sockets; if yes, you can connect
the HiFi system to the DVD player via cinch cables.
Connecting a HiFi system:
• Insert the white audio/video cinch cable plug into the cinch socket inscribed
AUDIO OUT L on the rear panel of the DVD player.
• Then insert the white plug on the other end of the audio/video cinch
cable into the left channel audio socket of the HiFi system.
• Insert the red audio/video cinch cable plug into the AUDIO OUT R inscribed
cinch socket on the rear panel of the DVD player.
• Then insert the red plug on the other end of the audio/video cinch cable
into the right channel audio socket of the HiFi system.
• Check with the instruction manual which settings on the HiFi system may
be necessary in order to reproduce sound via the HiFi system during the
playback of a DVD, VCD/S-VCD, Audio or MP3 CD from the DVD player.
Note:
For an optimal sound experience place your HiFi's speakers to the left
and right of the DVD player.
IB_KH6502_EN_LB3.qxd 07.12.2007 8:46 Uhr Seite 5