Kenwood AMPLIFIER/TUNER R-K1000 - Manual (Page 27)

TIMER DISPLAY SLEEP
MODE
FLAT TONE
ENTER
TUNING
RANDOM REPEAT P.MODE
AUTO / MONO
ClearA
VOL
RC-R0830E
P.CALL
TUNER D.AUDIO CD
BAND
AUX PHONO TAPE
D-IN1 D-IN2 D-IN3
ROOM EQ
MUTE
CLEAR
DIMMER
MODE
SOUND
PRESET
27
Related
Information
English
Presetting Stations Automatically (AUTO MEMORY) R P.28
Presetting Stations Manually (Manual Preset) R P.29
Audio Settings R P.37 onwards
z
z
z
Auto tuning
(Select this mode when
reception is good.)
Manual tuning
(Select this mode when
reception is poor.)
AUTO lit AUTO unlit
1 Select Auto tuning or Manual tuning.
2 Select a station.
Using Auto tuning
The radio automatically tunes in to the next station each time you press
the key. Repeat this step until you are tuned in to your preferred station.
Using Manual tuning
Press the key until the desired station is tuned or until you reach the
desired frequency.
„
„
Choosing from stations that are not stored (Auto/Manual tuning)
There is no sound while Auto/Manual tuning is in progress.
Auto tuning provides stereo reception while manual tuning provides
monaural reception.
The display changes as shown below each time you press the
[DISPLAY] key.
FM:
Program service name
R Preset No. R Day/Clock
AM or when the program service name is not stored:
Preset
No. R Day/Clock (AM)
Preset No. R “NO PS” R Day/Clock (non-RDS)
z
z
z
Press the [AUTO/MONO] key.
The mode changes as shown below each time you press the key.
Press the TUNING [ I]/[J] key.
When the station is tuned, “TUNED“ lights up on the display. If
you are receiving a stereo signal, “ST.” also lights up.
Receiving Broadcast Stations