Kenwood AMPLIFIER/TUNER R-K1000 - Manual (Page 59)

TIMER DISPLAY SLEEP
MODE
FLAT TONE
ENTER
TUNING
RANDOM REPEAT P.MODE
AUTO / MONO
ClearA
VOL
RC-R0830E
P.CALL
TUNER D.AUDIO CD
BAND
AUX PHONO TAPE
D-IN1 D-IN2 D-IN3
ROOM EQ
MUTE
CLEAR
DIMMER
MODE
SOUND
PRESET
59
Display Settings
English
Turning the Display Saver ON/OFF
Select “ON” or “OFF”.
Press the [ A] or [B] key.
Select “DISP. SAVER”.
Press the [ A] or [B] key.
2 2
Press the [ENTER] key.
3 3
Press the [ENTER] key.
The display saver is active. z
If the system is not used at all for a set period, this function scrolls
the display to prevent burn-in of the text on the display and uneven
display brightness.
When you are playing a CD (when the DP-K1000 (sold separately) is
connected), the display saver is activated if the system is not used at all
for 10 minutes after the CD stops playing. If you selected another input
source, the display saver is activated if the system is not used at all for 10
minutes after the last key is pressed.
If the R-K1000 is connected to the DP-K1000 using the system control
connection, the Display Saver runs on the DP-K1000 also.
z
z
The display saver is disabled. z
Press the [MODE] key. 1 1