Konica Minolta magicolor 2530 DL - Manual (Page 136)

Dual In-Line Memory Module (DIMM) 128
Required Memory during Printing
Installing a DIMM
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on Page 126. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
!"
If the duplex option is
installed, remove it.
600 x 600 dpi
1200 x 600 dpi 2400 x 600 dpi
2400 x 600 dpi (Line art)
Monochrome
(Simplex/Duplex) 64 MB 64 MB
Full color
(Simplex) 64 MB 64 MB
Full color
(Duplex) 128 MB 256 MB