Konica Minolta magicolor 2530 DL - Manual (Page 130)

Status, Error, and Service Messages 122
MEDIA JAM
DUPLEX LOWER Media has misfed in
the duplex option. Locate and remove the
misfeed.
MEDIA JAM
DUPLEX UPPER Media has misfed in
the duplex option.
MEDIA JAM
FUSER
MEDIA JAM
TRANSFER ROLLER
Media has misfed in
the transfer roller
area. This type of
misfeed means that
the media did not
make it to the paper
exit area.
MEDIA JAM
TRAY X Media has misfed
while being pulled
from the specified
tray (X).
PUT MEDIA : TRAY 1
“MEDIA” The media type set in
the printer driver is
different from the type
of media loaded into
Tray 1. Load the correct media
type into Tray 1.
PUT MEDIA : TRAY X
“SIZE” The media size set in
the printer driver is
different from the size
of media loaded. Load the correct media
size into the specified
tray.
SIZE/TYPE ERROR Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used. Load the correct media
size and type.
SIZE/TYPE ERROR
DUPLEX Media not compatible
with duplex printing. Use the correct media
size and type when
duplexing.
TONER LIFE END
X The X toner cartridge
is empty.
(Appears when
ENGINE/TONER
EMPTY STOP
is set)
Replace the toner car-
tridge.
This message... means... do this...