Konica Minolta magicolor 2530 DL - Manual (Page 37)

Configuration Menu Overview 29
TONER EMPTY Settings STOP / CONTINUE
When set to CONTINUE , printing continues
even if the toner cartridge is empty.
When set to STOP , printing stops when the
toner cartridge is empty.
ENERGY SAVER Settings 15 MINUTES / 30 MINUTES
/ 60 MINUTES/
120 MINUTES
Sets the length of time until the printer enters
Energy Saver mode after it no longer receives
print jobs or is not operating.
120 MINUTES is displayed only on the
model for the Americas.
The Energy Saver mode is automatically can-
celled when any of the following occurs:
# The printer is restarted.
# A print job is received.
# Any key on the control panel is pressed.
# The top cover is opened, then closed.
This menu is displayed only on the model for
the Americas when
ENGINE/SERVICE/
ENERGY SAVER is set to ON .
AUTO CONTINUE Settings ON / OFF
When set to ON , the printer continues printing
if the correct size media is not loaded in the
specified tray.
When set to OFF , the printer stops and
displays a message indicating that media
should be loaded into the specified tray if the
specified tray runs out of media.