Konica Minolta magicolor 2530 DL - Manual (Page 120)

Solving Other Problems 112
You hear
unusual
noises. The printer is not
level. Place the printer on a flat, hard, level
surface.
The tray is not
installed correctly. Remove the tray that you are printing
from and reinsert it completely into the
printer.
There is a foreign
object stuck inside
the printer. Turn off the printer and remove the
object. If you cannot remove it, contact
Technical Support.
The
web-based
utility cannot
be accessed. The PageScope Web
Connection Adminis-
trator’s password is
incorrect. The PageScope Web Connection
Administrator password has a 6-char-
acter minimum and a 16-character
maximum. For details of the Page-
Scope Web Connection administrator
password, refer to the magicolor 2530
DL Reference Guide.
Media is
wrinkled. The media is moist
from humidity or hav-
ing water spilled on it. Remove the moist media and replace it
with new, dry media.
The media feed roller
or fuser unit is defec-
tive. Check them for damage. If necessary,
contact Technical Support with the
error information.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used. Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 42.
Envelopes are being
printed with the fuser
separator levers in
the plain paper posi-
tion. Before printing envelopes, place the
fuser separator levers in the envelope
position.
Symptom Cause Solution