Konica Minolta magicolor 2530 DL - Manual (Page 38)

Configuration Menu Overview 30
TRAY CHAINING Settings ON / OFF
When set to ON , the printer automatically
switches to a different tray containing media
of the same size and type, if the specified tray
runs out of media.
When set to OFF , the printer stops and
displays a message indicating that media
should be loaded into the specified tray if the
specified tray runs out of media.
ENGINE
SERVICE Use this submenu to view information related to the engine.
TOTAL FACE
COUNT The number of page faces that have been
printed to date.
COLOR FACE
COUNT The number of color page faces that have
been printed to date.
BW FACE
COUNT The number of monochrome page faces that
have been printed to date.
CONTROL-
LER VER. The current controller firmware version.
ENGINE
VER. The printer engine firmware version.
COLOR
CALIBRA-
TION Performs color calibrations in order to adjust
the color shift.
REMOVE
ALL TONER All toner cartridges can be removed.
First, the cyan (C) toner cartridge is rotated,
so that it can be removed. After it is removed
and all covers are closed, the black (K) toner
cartridge is rotated, so that it can be removed.
In the same way, the yellow (Y) and magenta
(M) toner cartridges are rotated one by one,
so that they can be removed.
ENERGY
SAVER Settings ON / OFF
When set to ON , Energy Saver is enabled.
When set to OFF , Energy Saver is disabled
and the ENGINE/ENERGY SAVER menu is
not displayed.
This menu is displayed only on the model for
the Americas.