Konica Minolta magicolor 2530 DL - Manual (Page 16)

Selecting Driver Options/Defaults (For Windows) 8
Selecting Driver Options/Defaults
(For Windows)
Before you start working with your printer, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should “declare” the options in the driver.
1
Choose the driver’s properties as follows:
– (Windows XP/Server 2003)
From the start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the KONICA MINOLTA mag-
icolor 2530DL printer icon and choose Printing Preferences.
– (Windows 2000)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA magicolor
2530DL printer icon and choose Printing Preferences.
– (Windows Me/98SE)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA magicolor
2530DL printer icon and choose Properties. Choose Printer Proper-
ties.
– (Windows NT 4.0)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA magicolor
2530DL printer icon and choose Document Defaults.
2
If you have installed available options, proceed with the next step. Other-
wise, proceed with step 8.
3
Select the Device Options Setting tab.
4
Check that the options have been correctly identified.
!"
Since Auto configure is selected as a default with this driver, installed
options are automatically identified. If, for some reason, the options
are not correctly identified, follow the operations described in steps 5
through 7.
5
Clear the Auto configure check box.
6
Select an option (one at a time) and select Installed on the Settings
drop-down menu list.
!"
If you accidentally add an uninstalled option, select the option in the
Device Options list and then select Not Installed on the Settings
drop-down menu list.