Lexmark 4900 Series - Manual (Page 56)

Make sure:
• The rough side of the transparencies faces you.
• If the transparencies have a removable strip, each strip faces away from you and down toward the printer.
• The transparencies are loaded in the center of the paper support.
• The paper guides rest against the edges of the transparencies.
Notes:
• Transparencies with paper backing sheets are not recommended.
• Transparencies require more drying time. Remove each transparency as it exits, and then allow it to dry to avoid
ink smudging.
Iron-on transfers
You can load up to 10 transfers.
Make sure:
• You follow the loading instructions that came with the iron-on transfers.
• The print side of the transfers faces you.
• The transfers are loaded in the center of the paper support.
• The paper guides rest against the edges of the transfers.
Note: For best results, load transfers one at a time.
Greeting cards, index cards, photo cards, postcards
You can load up to 25 cards.
Make sure:
• The print side of the cards faces you.
• The cards are loaded in the center of the paper support.
• The paper guides rest against the edges of the cards.
Note: Photo cards require more drying time. Remove each photo card as it exits, and then allow it to dry to avoid ink
smudging.
Custom-size paper
You can load up to 100 sheets (depending on the thickness).
Make sure:
• The print side of the paper faces you.
• The paper size fits within these dimensions:
Loading paper
56