Lexmark 101 - Manual (Page 27)

Paper and specialty media guidelines
Load up to: Make sure that:
100 sheets of plain paper
1 2
• The paper guides rest against the edges of the paper.
• You load letterhead paper with the print side faceup and
the top of the letterhead going into the printer first.
25 sheets of heavyweight matte paper • The print side of the paper is faceup.
• The paper guides rest against the edges of the paper.
• You select Automatic, Normal, or Photo print quality.
Note: Draft mode is available but is not recommended for use
with expensive paper such as heavyweight matte, labels,
photo cards and glossy paper.
20 sheets of banner paper • You remove all paper from the paper support before
inserting banner paper.
• You use banner paper designed for inkjet printers.
• You place a stack of banner paper on or behind the printer,
and feed in the first sheet.
• The paper guides rest against the edges of the paper.
• You select A4 Banner or Letter Banner paper size.
Loading paper and original documents
27