Setting the bluetooth security level – Lexmark 101 User Manual
Page 45
To set up a connection between the printer and a Bluetooth-enabled device:
1
Insert a USB Bluetooth adapter into the USB port located on the front of the printer.
Bluetooth
R
Bluetooth Dongle Connected
appears on the display.
Note: A Bluetooth adapter is not included with the printer.
2
From the printer control panel, press
.
3
Press the arrow buttons to scroll to Bluetooth Setup, and then press
.
4
Press the arrow buttons to scroll to Discovery, and then press
.
5
Make sure Discovery is set to On. If necessary, press the arrow buttons to scroll to On, and then press
.
The printer is now ready to accept a connection from a Bluetooth-enabled device.
6
Configure the Bluetooth-enabled device to set up a connection to the printer. For more information, see the
documentation for your Bluetooth device.
Note: If the Bluetooth Security Level on the printer is set to High, then you must enter a pass key.
Setting the Bluetooth security level
1
Insert a Bluetooth USB adapter into the USB port.
Bluetooth
R
Bluetooth Dongle Connected
appears on the display.
Note: A Bluetooth adapter is not included with the printer.
Printing
45