Scanning to a flash drive or memory card, Scanning photos into an editing application, Using the printer control panel – Lexmark 101 User Manual

Page 57

Advertising
background image

Notes:

If the printer is connected only to a local computer, then the printer will automatically download a list of the
scan applications.

You may be prompted to enter a PIN if the computer requires it. Press the arrow buttons to enter the PIN.
Press

each time you enter a number.

To assign a computer name and a PIN to the computer, see the Help for the printer software associated with
your operating system.

5

Press the arrow buttons to select an application, and then press

.

6

Press the arrow buttons to select the resolution quality and the original image size. Press

each time you make

a selection.

7

Press

to start scanning.

The scan is complete when the application you selected in step 5 opens on the destination computer, and the scan
appears within the application as a new file.

Scanning to a flash drive or memory card

Before you begin, make sure your flash drive or memory card is not write protected.

1

Load an original document faceup into the ADF or facedown on the scanner glass.

2

From the printer control panel, press .

3

When Scan to appears on the display, insert the flash drive or memory card.

4

Press the arrow buttons to scroll to USB Flash Drive or Memory Card, and then press

.

5

Press the arrow buttons to select the resolution quality, the type of output you want to create, and the original
image size. Press

each time you make a selection.

Note: Select the PDF file type if you want to scan multiple pages and save them as one file.

6

Press

to start scanning.

The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.

Scanning photos into an editing application

Using the printer control panel

1

Load a photo or photos facedown on the scanner glass.

2

From the printer control panel, press .

3

Press the arrow buttons to scroll to Computer or Network, and then press

.

4

Press the arrow buttons to select the name of a local or network computer, and then press

.

The local or network computer is the destination that will receive the scan. Wait until the printer has finished
downloading the list of scan applications available on the selected computer.

Scanning

57

Advertising
This manual is related to the following products:

10E