Lanier LD235 - Manual (Page 32)

Copying
22
2
D Enter the horizontal size of the
paper with the number keys,
and then press the [#] key.
Note
❒ If [Horiz. mm] is not highlight-
ed, press [Horiz. mm].
❒ To register the custom size
entered, press [Program], and
then press [Exit].
E Press [OK].
When copying onto special paper
A Press the {#} key.
B Select paper type in Special pa-
per.
C Press [OK].
D
Place your originals, and then
press the {Start} key.
Note
❒ When copying onto OHP trans-
parencies, remove copied sheets
one by one.
E
When your copy job is finished,
press the {Clear Modes} key to
clear the settings.