Lanier LD235 - Manual (Page 81)

Copier Functions
71
2
❖ Front/Back covers
The first and last pages of your
original are copied on specific pa-
per for use as covers.
• Copy
• Blank
Reference
p.99 “Front Cover Copy in
Combine”
A
Press [Cover / Slip Sheet].
B
Press [Front Cover] or [Front/ Back
Cover]
.
C
Select [Copy] or [Blank] for the cov-
er sheet.
D
Select the paper tray that contains
the sheet paper to copy the origi-
nals, and then press [OK].
E
Place your originals in the ADF,
and then press the {Start} key.
Designate
Use this function to have certain pag-
es of your original copied onto slip
sheets.
Preparation
Before using this function, set the
special paper tray for slip sheets.
See “Cover Sheet Tray”and “Slip
Sheet Tray”in “ Tray Paper Set-
tings”, General Settings Guide.
Note
❒ The slip sheets should be the same
size and orientation as the copy pa-
per.
❒ You cannot place the copy paper in
the bypass tray.
❒ You can specify the pages up to 20.
A
Press [Cover / Slip Sheet].
B
Press [Desig. / Chapter].
C
Press the key to select the chapter
number.
GCCOVE0E