Auto reduce/enlarge, Size magnification, Auto reduce/enlarge size magnification – Lanier LD235 User Manual
Page 40
Copying
30
2
Auto Reduce/Enlarge
The machine can choose an appropri-
ate reproduction ratio based on the
paper and original sizes you select.
Note
❒ You cannot use the bypass tray
with this function.
❒ When using Auto Reduce/Enlarge,
see the following table for original
sizes and orientations you can use:
❖ Metric version
❖ Inch version
Reference
p.11 “Sizes difficult to detect”
A
Press [Auto Reduce/Enlarge].
B
Select the paper tray.
C
Place your originals, and then
press the {Start} key.
Size Magnification
This function calculates an enlarge-
ment or reduction ratio based on the
lengths of the original and copy.
Note
❒ Measure and specify the lengths of
the original and copy by compar-
ing "A" with "a".
A
Press [Reduce / Enlarge] .
B
Press [Specifd. Ratio].
Where original is
placed
Original size and
orientation
Exposure glass
A3L, B4 JISL,
A4KL, B5 JISKL
ADF
A3L, B4 JISL,
A4KL, B5 JISKL,
A5KL, B6 JISKL,
11”× 17”L,
8
1
/
2
" × 11"KL
Where original is
placed
Original size and
orientation
Exposure glass
11" × 17"L,
8
1
/
2
" × 14"L,
8
1
/
2
" × 11KL
ADF
A4LK, 11" × 17"L,
8
1
/
2
" × 14"L,
8
1
/
2
" × 11"KL,
5
1
/
2
" × 8
1
/
2
"KL