Tools required for assembly, Bolt length ruler – Life Fitness 8211 User Manual

Page 2

Advertising
background image

IMPORTANT NOTES

Please note:

Tools Required for Assembly

* Thank you for purchasing the LIFE FITNESS 8211 50 LB ADD-ON KIT. Please read these

instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.

2

NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.

BOLT LENGTH RULER:

* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy

water. Touch-up paint can be purchased from your LIFE FITNESS customer service repre-
sentative at (800) 328-9714.

Bolt Length Ruler

0

1

2

3

4

5

6

1/2

1/2

1/2

1/2

1/2

1/2

BOLT LENGTH

There is a risk assumed by individuals who use this type of equipment. To minimize risk, please
follow these rules:

2. Do not allow minors or children to play on or around this equipment.

1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.
Failure to do so may result in serious injury.

3. Exercise with care to avoid injury.

4. If unsure of proper use of equipment, call your local LIFE FITNESS STRENGTH distribu-

tor or call the LIFE FITNESS STRENGTH customer service department at (800) 328-9714.

* 3/4” wrench, 9/16” wrench
* Ratchet with 3/4” and 9/16” sockets
* 7/32” Allen wrench
* Adjustable wrench
* Tape measure

5. Consult your physician before beginning any exercise program.

Advertising