Life Fitness 8211 - Manual (Page 7)

7
STEP 7:
• Screw the threaded end of the new CABLE (66710) (2) approximately 3/4” into the end of the WEIGHT STACK SHAFT (1) and
tighten jam nut securely.
• If the HEAD PLATE does not sit on top of the first WEIGHT PLATE, push the head plate down, insert the SELECTOR PIN and
perform several repetitions on the machine. This will relax the cable system and prevent the HEAD PLATE from lifting up.
• If after completing the previous step, the HEAD PLATE still does not sit on top of the first WEIGHT PLATE or if there is excess
slack in the cable system, adjust the threaded end of the CABLE accordingly and retighten the jam nut.
FIGURE 7
1
2
Thank you for purchasing the LifeFitness 8211 50 LB. ADD-ON KIT. If unsure of proper use of equipment, call your local
LifeFitness distributor or call the LifeFitness customer service department at (800) 328-9714.
TOWER
• Reassemble SHROUD to the TOWER.
SHROUD