Lenovo 3000 G230 - Manual (Page 36)

28
Chapter 2. Using Your Computer
To set a User Password:
1
Turn on your computer. Press F2, while the initial screen is displayed.
The InsydeH2O Setup Utility screen opens.
2
Select Security, using the cursor directional keys.
3
Select Set User Password, and press the Enter key. The Set User
Password window opens.
4
Choose your user password, which can be from two to eight
alphanumeric characters in any combination. Type it in the Enter New
Password
field.
5
Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
6
Commit your password to memory, and press the Enter key.
7
Press F10 to exit.
8
Select Yes in the Exit Saving Changes window.
Note :
You can set the User Password only when the Supervisor Password have
been set.
Lenovo G230 UG V1.0_en.book Page 28 Monday, July 28, 2008 7:29 PM