Lenovo 3000 G230 - Manual (Page 39)

Chapter 2. Using Your Computer
31
7
Choose your HDD Master Password, which can be from two to eight
alphanumeric characters in any combination. Type it in the Enter New
Password
field.
8
Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
9
Commit any password to memory, and press the Enter key.
0
Press F10 to exit.
A
Select Yes in the “Exit Saving Changes” window.
When you turn on the compute, you need to type in the HDD Master
or User password to enter the operation system next time.
Changing or Removing the HDD Passwords
To change or remove the HDD password, do as follows:
ƒ To change the HDD User password, select Set Hard Disk User
Password,
and type the correct HDD User password in the Enter
Current Password field, and press the Enter key to move to the Enter
New Password field and type in a new HDD User password, and then
retype it in the Confirm New Password field.
ƒ To remove the HDD Master password, select Set Hard Disk Master
Password
, and type the correct HDD User password in the Enter
Current Password field, and then finally press the Enter key thrice.
Lenovo G230 UG V1.0_en.book Page 31 Monday, July 28, 2008 7:29 PM