LSI U160 - Manual (Page 32)

3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
2-12 Installing the LSIU160
If you have more than one internal device to connect, use an internal
SCSI ribbon cable with the required number of connectors attached
along its length and proceed to the next step. An example of this type of
connection is provided in
Figure 2.6 . If you have only one internal device,
proceed to Step 4 on page 2-14.
Step 3. Plug the cable into each additional device as needed.
An example of this type of chained connection is shown in
Figure 2.7 . Make sure to match pin 1 on all connections.
Figure 2.6 Connecting Additional Internal SCSI Devices