LSI 21003 - Manual (Page 17)

LSI21003 PCI to Dual Channel SCSI Host Adapter 2-1
Chapter 2
Installing the LSI21003
This chapter describes installing the LSI21003 into PCI computer
systems and includes these topics:
•
Section 2.1, “Quick Installation Procedure,” page 2-1
•
Section 2.2, “Detailed Installation Procedure,” page 2-3
•
Section 2.3, “Setting SCSI IDs,” page 2-22
•
Section 2.4, “Setting Interrupts (Exceptional Cases),” page 2-24
•
Section 2.5, “Completing the Installation,” page 2-25
2.1 Quick Installation Procedure
This section provides quick setup instructions for the experienced
computer user with prior host adapter installation and SCSI bus setup
experience. If you prefer more detailed guidance for installing the
LSI21003, please follow the instructions in
Section 2.2, “Detailed
Installation Procedure.”
For safe and proper installation, check the user’s manual that was
supplied with your computer and perform the following steps.
Step 1. Ground yourself before handling the host adapter board.
Note: The use of a static ground strap is recommended.
Step 2. Remove the LSI21003 from the packing and check that it is not
damaged.
Step 3. Switch off and unplug the system.
Step 4. Remove the cabinet cover on your computer to access the PCI
slots.
Step 5. Locate the slots for the PCI plug-in board installation.