Lexmark 4227-X00 - Manual (Page 100)

Repair Information 4-37
4227-X00
7. Release and remove the separator plate spring [6].
8. Release the spring [7] from the right end of the lower pinch
roller.
9. Remove the two carrier plate screws [8]. One is in the slot in the
slider cam.
10.Remove the support shaft screw [9] and the two platen screws
[10].
11. Remove the right side frame.
Note: The upper feed roller bearing should stay in the side frame.
The lower pinch roller bushing is free on the end of the shaft.